From GpsWiki
Trip Info Page
How do I get to the Trip Info page?
If you have the Trip Info page enabled in Page Order (default from factory), either press the PAGE button or the QUIT button to scroll through your screens until you get to the Trip Info page. If the Trip Info page has been disabled in Page Order, then press the MENU button, use the UP/DOWN rocker pad to select Trip Info, then press ENTER.
The Trip Info Page
The page is really two pages in one: Track Mode Info Page and Navigation(Routing) Mode Info Page.
 |
|
The MENU Page
Pressing the MENU button from the Trip Info Page displays one of the following screens depending on whether you are in Tracking mode (left) or Navigation mode (middle and right).
 |
|
|
View Comment Details
NOTE: Only available while in Navigation mode
[Add details here]
Log Your Geocache Find
NOTE: Only available while in Navigation mode to a geocache.
[Add details here]
Route Options
NOTE: Only available while in Navigation mode
This option has 3 sub-options:
- Stop Navigating - This disables Navigation mode and returns you to Tracking Mode.
- Back on Track - [Add details here]
- Switch to Hiking/Driving - If currently road routing (driving), then this option allows you to switch to Hiking (direct) mode. If currently in Hiking (direct) mode, then this option allows you to switch to Driving (road) mode.
Change Info Fields
This option allows the info fields to be changed. To change the Tracking Mode info fields, you must be in Tracking Mode. To change the Navigation Mode info fields, you must be in Navigation Mode. For more information on changing the info fields, see Info Fields.
Restore Info Defaults
This option restores the info fields back to the factory default settings, both Tracking Mode and Navigation Mode.
Switch to Show Large Text
This option displays the info fields as large text. The middle screenshot shows the info fields displayed while in Tracking Mode. The right screenshot shows the info fields displayed while in Navigation Mode.
To switch back to normal mode, select "Switch to Show Small Text".
Reset Info
This option is used to reset the trip information values back to zero. By default, all four trip information values are checked and will be zeroed when Reset Now is selected and ENTER is pressed. If you don't want all the values cleared, then un-check the values you don't want cleared before selecting Reset Now.
